Refurbishment and fit-out of office space for an energy infrastructure operator
Design and cost documentation, over 3,000 m²
Poznań, Poland
Sample work
Delivered structures shown anonymised, out of respect for the consultancies and investors we worked for. Full sample packs of drawings and calculation reports are available under NDA.
Sample packs · sent within one working day after NDA
Transfer slab GA, reinforcement drawing with schedule, and the matching chapter of the calculation report.
Request under NDAPortal frame haunch connection: calculation with proof, fabrication drawing, bolt list.
Request under NDAAssumptions, loads, one member proof and the decision register, in the format a checker receives.
Request under NDADelivered structures · anonymised
Several apartment buildings set at an angle to the grid of a shared car park, on a transfer slab, phased and calculated as one whole. Plus a service pavilion with a shared terrace and a curtain-wall facade.
A two-unit house with a basement garage below the groundwater table. House-scale structure with engineering-project problems: uplift, watertightness, driveway levels and a movement joint between the units.
A house with large glazing, where a concrete deep beam works instead of a column in the window, and plans rotated against north had to be brought to one grid.
A single-storey service building of about 500 m² within a residential estate, with a roof terrace accessible to residents and a curtain-wall facade requiring an edge beam.
Earlier work 2016–2024 · Selected earlier projects in short, anonymised form. Plus numerous multi-family buildings and estates across Poland.
Design and cost documentation, over 3,000 m²
Poznań, Poland
Structural design
Warsaw, Poland
Structural design, usable area 4,582 m²
Warsaw, Poland
Series of refurbishment designs, structure for changed loads and use
Warsaw, Poland
Series of hall and back-of-house refurbishment designs
Warsaw, Poland
Structural design of the hall and office/social building
Lublin region, Poland
Structural design of production halls with office/social parts
Katowice and Szczecin, Poland
Structural design of the hall and office building
Lower Silesia, Poland
Structural design
Poland
Structural design
Rzeszów, Poland
Structural refurbishment design
Warsaw, Poland
Structural design, sellable area approx. 2,200 m²
Warsaw-Wesoła
Structural design, sellable area approx. 1,500 m²
Marki
Structural design, sellable area approx. 900 m²
Kobyłka
Structural design, sellable area approx. 3,800 m²
Marki
Structural design, sellable area approx. 2,800 m²
Majdan, Wiązowna
Structural design, sellable area approx. 3,600 m²
Warsaw
Structural design, sellable area approx. 1,200 m²
Warsaw-Wawer
Structural design, sellable area approx. 2,200 m²
Warsaw-Wesoła
Structural design, sellable area approx. 1,300 m²
Domaniew, Brwinów
Structural design, sellable area approx. 16,280 m²
Wiązowna
Structural design, sellable area approx. 9,280 m²
Rozalin, Nadarzyn
Structural design, sellable area approx. 2,900 m²
Warsaw-Wesoła
Structural design, sellable area approx. 2,160 m²
Grabina, Mińsk Mazowiecki
Structural design, sellable area approx. 1,080 m²
Rynia, Nieporęt
Structural design
Mazovia, between Warka and Grójec (NDA)
Structural design, sellable area approx. 780 m²
Warsaw
Structural design, sellable area approx. 980 m²
Warsaw
Structural design, sellable area approx. 2,230 m²
Warsaw
Structural design, sellable area approx. 3,690 m²
Warsaw
Structural design, sellable area approx. 1,050 m²
Konstancin-Jeziorna
Structural design, sellable area approx. 2,300 m²
Warsaw
Structural design, sellable area approx. 3,862 m²
Chorzów
Structural design, sellable area approx. 32,500 m²
Wiązowna near Warsaw
Structural design
Otwock
Structural design, sellable area approx. 4,078 m²
Boryszew, Wiązowna
Structural design, sellable area approx. 21,250 m²
Warsaw-Rembertów (NDA)
Structural design, sellable area approx. 1,230 m²
Warsaw
A scoped offer within 48 hours, the delivered sheet within a week, calibrated to your standard. The calibration sheet is free.